• It is suitable for use at shops, stores and home, especially for the patient, disabled and those elders or women who stay at home alone.
• Ready to install and set-up.
• Easy to use remote-control for distress call.
• Long lasting 7 hours backup battery included.
• Ideal for nurseries, home security purpose and the community etc.
• Ready to connect with magnetic switches, PIR sensors and gas/smoke sensors etc. becoming a firm security/safety system.

 In emergency, user simply pulls out the loop on the transmitter, then the receiver will automatically trigger the built-in & external sirens ( if not set at nursing/silent mode ) and dial the preset numbers for help.

To Call For Help in Emergency

Specification :

1. Power of receiver Input : AC 110/220V 60Hz / Output : DC 12V 500mA
2. Power of transmitter : 12V Alkaline battery
3. Backup battery : DC 9V (approx. 7 hours of use)
4. Range : Approx. 30 meters of straight line
5. Radio frequency : 315 MHz
6. Sound level of built-in siren : 90 dB

 

Parts Description & Install Diagram :

Operation :

• To call for help in emergency :
  Simply pull out the transmitter loop, then the receiver will trigger the sirens (present *231*) and automatically dial the preset numbers for help. The dialing process is as follows.
  
  1. Dial the preset 4 numbers in sequence.
  2. Re-dial these 4 numbers again.
  3. Dial the preset pager number once.

Note :

• If siren sound is not required, set the system in nursing/silent mode (present *232*,refer section B-2-b below). Then the receiver will dial silently.
• To pull the loop of transmitter in any condition , it must call out immediately.
• To deactivate, replace the transmitter loop and hold the transmitter button for one second. Then the siren sound and auto-dialing will be stopped immediately.
• Once the dialing gets through, the recorded message will be played and ended with 5 beep sounds. If anyone who receives the call presses the "#" button on his phone before end of 5 beep sounds, the playing will be stopped immediately and this number will not be re-dialed again in the step 2 above.